VMware Network Adapter VMnet1 — что это такое? (VMnet8)
Приветствую. Большинство софта при установке — могут устанавливать свои дополнительные компоненты, создавать записи в реестре, автозагрузке, профильной папке AppData, задания в планировщике. Но некоторые программы могут даже устанавливать виртуальные устройства.
VMware Network Adapter VMnet1 — что это?
Виртуальная сетевой адаптер, создающаяся при установке программы VMware.
Софт VMware предназначен для создания виртуальных машин (компьютеров) — ПК со своим жестким диском (HDD), процессором (CPU), CD/DVD-приводом, оперативной памятью и другими устройствами. При создании машина настраивается, например можно указать количество ядер, обьем оперативки, жесткого диска, количество устройств и так далее. Для поддержки работы сети VMware устанавливает виртуальные адаптеры — VMnet1 и VMnet8:
Также в настройках машины можно выбрать настройку NAT: Used to share the host’s IP address, данная настройка позволяет вообще обойтись без данных адаптеров и их можно отключить. За обеспечение интернета будет отвечать программный модуль vmnat.exe.
VMnet1 и VMnet8
VMnet1 — хост, тип создания виртуальной локальной сети в пределах хоста. Другими словами — данная локальная сеть содержит DHCP-сервер, подключенный к виртуальному коммутатору VMnet1, предоставляющий IP-адреса машинам из определенного диапазона. Принцип работы:
VMnet8 — NAT. Похоже на тип подключения хост, однако в сети также присутствует специальное устройство трансляции IP-адресов — NAT. Данное устройство выступает в роли маршрутизатора, который может иметь доступ к интернету. Как виртуальный роутер, раздающий интернет в локальную сеть. Принцип работы:
Как удалить виртуальный адаптер?
При установленной VMware удалить адаптеры можно через Virtual Network Editor:
Выбираем адаптер — нажимаем Удалить (Remove Network).
При некорректном удалении программы VMware — могут остаться адаптеры VMnet. В теории их можно удалить обычным способом через диспетчер устройств.
Запускаем диспетчер устройств — зажмите Win + R, вставьте команду devmgmt.msc, нажмите ОК.
Далее найдите устройство VMnet — нажмите по нему правой кнопкой > выберите свойства:
Отобразится окошко свойств — активируйте вкладку Драйвер. Далее нажмите Удалить:
Установите галочку удаления драйверов, после — нажмите ОК:
Также информация об удалении адаптера присутствует на официальном сайте VMware.
3 Types of Virtual Switches | VMnet0, VMnet8, VMnet1 in VMware
As you can create multiple VMs on a physical machine, do you know how they connect to the Internet? In this article, I will introduce the 3 types of VMnet in VMware Workstation.
By Crystal 
/ Last Updated July 15, 2022
What is VMnet in VMware
To connect your VMware Workstation VMs to the Internet, you may need to understand VMnet first.
VMnet, or virtual networks, can also be referred as virtual switches. As an important part of the virtual networking components, a virtual switch is used to connect other networking components together, including virtual network adapters, the virtual DHCP server, and the NAT device, just like a physical switch.
You can either use a default VMnet to connect your VM to the Internet, or configure a custom network manually. In this article, I will introduce the 3 default VMware Workstation VMnet, and the steps of how to configure a custom network.
What are the 3 default VMnet in VMware Workstation
There are 3 default types of virtual networks (VMnet):
- VMnet0 — Bridged
- VMnet8 — NAT
- VMnet1 – Host-only
I will briefly introduce them in this section. You can compare the differences between VMnet0, VMnet8, VMnet1, for example, bridge vs NAT in VMware, and take the default network configuration you need to connect your VM to the host computer.
Which mode is VMware VMnet0 in by default
VMware VMnet0 is one of the default virtual networking that is set to use auto-bridging mode and bridge to all active network adapters on the host system.
The bridged mode is used by default when you create and install a VM, and is very convenient when you only need to configure one VM connected to a physical host, as there is no need to set up the network manually.
The DHCP server will automatically recognize the VM and assign it an IP address on the same subnet as the host, and is fully visible on that subnet. And you can also configure it manually if you want.
Which mode is VMware VMnet8 in by default
VMware VMnet8 uses NAT virtual network by default, which means the VM in VMnet8 is connected via network address translation (NAT) to the host network adaptor, make your VM looks like it’s behind a NAT router. It is the simplest networking method, and mainly used in multiple VMs environments such as hadoop cluster structures or distributed services.
Which mode is VMware VMnet1 in by default
VMware VMnet1 is uses host-only mode to build an isolated network environment, which means the VMs can only access the addresses within the network segment specified in the host-only mode, forming internal communication with the host, and cannot access the external networks.
How to modify the network connection in VMware Workstation
Now you have known what is virtual network, and what the 3 default VMnet are. In this part, I will introduce how to put them into use — how to connect your VM to the Internet.
How to change the network connection mode in VMware Workstation
1. Launch VMware Workstation, select the target VM and click VM > Settings on the toolbar.
2. Navigate to Hardware > Network Adapter from the left inventory, select the type of Network connection you want. Click OK to save.
How to create a network adapter in VMware Workstation
1. Launch VMware Workstation, select the target VM and click VM > Settings on the toolbar.
2. Click Add button at the bottom of the left inventory, and select Network Adapter in the pop-up wizard, click Finish to continue.
As the wizard closed, you can see the newly created Network Adapter in the left inventory.
How to remove a network adapter in VMware Workstation
1. Launch VMware Workstation, select the target VM and click VM > Settings on the toolbar.
2. Select the Network Adapter you want to remove and click Remove button at the bottom of the left inventory.
How to configure a custom network
Taking the default network configuration and connect VMs to the host via NAT or bridged mode is sufficient for most VMware Workstation users. However, if you have more requirements, you can also create a private custom network with more complex configurations in VMware Workstation by using the Virtual Network Editor.
Here are the general steps to set VMware NAT network.
1. Launch VMware Workstation, click Edit > Virtual Network Editor… on the toolbar.
2. Click Add Network… and select a VMnet number. Click OK to add.
3. Configure the newly created VMnet to Host-only, Bridged, or NAT mode.
Note: Only one network can be set to NAT.
✦ Modify DCHP Settings
Check Use local DHCP service to distribute IP address to VMs option, and click DCHP Settings to modify the IP address manually. Click OK to save.
Note: It is not recommended to modify the subnet mask, since some virtual network services may not work with the custom subnet mask at the same time.
✦ Modify Bridged Settings
Check Bridged (connect VMs directly to the external network) option and select an adapter to Bridged to.
✦ Modify NAT Settings
Click NAT Settings to open a wizard, modify the Gateway IP manually and click Add button.
Provide Host port, Type, Virtual machine IP address, and Virtual machine port, click OK to save.
Click DNS Settings and NetBIOS Settings button and configure them respectively, click OK to save.
Note: NetBIOS Settings is limited to Windows hosts.
How to solve the issue that VM cannot connect to the Internet
Users may encounter problems when configuring VMware Workstation VMnet, for example, the VM cannot connect to the Internet even when the network adapter is set correctly.
Here I summarized 3 effective methods to solve this issue.
- Restart VMware DHCP Service
- Restore defaults on VMware Network Editor
- Reinstall VMware Workstation
Restart VMware DHCP Service
1. Open Windows Services by press Win + R and type services.msc.
2. Check if VMware DHCP Service is running properly. If not, right-click on it and select Properties.
3. Change Startup type into Automatic, and click Start button under Service status, click OK to save.
Note: If restarting the VMware DHCP Service does not work, try restarting the VMware NAT Service in the same way.
Restore defaults on VMware Network Editor
1. Launch VMware Workstation, click Edit > Virtual Network Editor… on the toolbar.
2. Click Restore Defaults button at the left bottom corner.
Summary
If you want to connect your VM to the Internet, you may need to configure virtual networks (VMware VMnet) according to your needs. In this article, I introduced what are the 3 default VMnet in VMware, and how to configure a custom network. In addition, I summarized 3 ways to solve the issue that VM cannot connect to the Internet.
In addition to this, you may also want to learn how to backup VMware Workstion to protect your virtual machines and the important data on them.
Best Enterprise Backup Solution
- VMware and Hyper-V Backup
- SQL Server/Workstation Backup
- Scheduled Automatic Backup
- Flexible Backup Cleanup Policy
- Backup and Manage Centrally
Still Need Help?
Have your problem been solved? If not, please input query in the search box below.
VMware Interfaces Tutorial
If you are new to VMware and the concept of Virtual Machines, or even if you have been working with them for a while but don’t quite understand how the Virtual Machine accesses the network through your host machine, then this article is for you. This VMware interfaces tutorial will guide you on how to manage properly VM nets from inside the VMware program.
Assumptions
But let’s begin with the basics. we will assume that you have installed some version of VMWare for this article – and in particular VMWare Player and that your host machine is a Windows PC of some vintage. The principles hold true for all versions of VMWare, and similar concepts apply for other virtualization platforms.
We’ll also assume you understand the concept of a Host Machine (that’s your PC) and a Guest Operating System (that’s the OS that’s running on your Virtual Machine). Finally, we’ll assume your Host PC obtains its IP address and settings via DHCP.
Your Host PC
When you installed VWMare Player, your Host PC gained two virtual interfaces. You will see these interfaces turn up in several different places; on your host machine, in your VMWare Configuration and possibly linked to any Guest OS you run.
On your host machine, you can see them when you run the ipconfig command, or (for the GUI junkies) in your Network Settings wherever that lives in whichever version of Windows you are running (we are using Windows Vista/7 on the host machine). These new interfaces will be called VMnet1 and VMNet8. Your regular adapter is usually known as Local Area Connection.
Note that both VMnet1 or VMnet8 have NO default gateway, are NOT DHCP enabled and have NO DNS server configured. These interfaces are set up by VMware Player, and we will explore them in more detail later. The Local Area Connection for this Host PC does have DHCP configured, has been told the DNS server is at 192.168.1.12 and been assigned a default gateway of 192.168.1.1.
Key Point #1 – Your host PC has some extra interfaces known as VMware Network Adapter VMnet1 and VMware Network Adapter VMnet8. We’ll refer to them as VMnet1 & VMnet8 from now on. Note that these adapters have IP addresses already.
Next, look at VMWare Player. So that we are all playing the same game, we’ll suggest you begin to create a new Virtual Machine (VM) for this exercise.
To create your VM in VMware Player, click File->Create a New Virtual Machine; Select “I will install the operating system later“; click Next; Choose a guest operating system (we choose Linux/Ubuntu) and click Next; name your Virtual Machine and click Next; allocate a small amount of space for the Disk Capacity (we used 2GB) and click Next; then finally click Finish.
Now from the main VMware Player Window, select your new (or existing) VM and select Edit virtual machine settings; and in the Hardware list, select your Network Adapter. You will see three choices on the right hand side:
It is the Network connection section that we want you to look at.
Here you see three options that correspond directly to the output of the ipconfig command you issued earlier on your PC; Bridged, NAT and Host-only.
Bridged Network connection
The Bridged networking option is the easiest to understand. If you choose to link your guest OS’s Network Adapter in Bridged mode, it will share the network interface with the Host.
If your guest OS automatically obtains an IP address it will be on the same subnet as the host, the host will be able to ping the guest, and the guest will be able to ping the host and any other devices on that subnet directly. Other devices on this subnet will see the guest as another PC on the network with its own IP address and own MAC address.
Here is the resulting configuration on an XP guest running on the Vista/7 host referred to above:
Four things to note:
- The DHCP assigned IP address, 192.168.1.150 with Subnet Mask 255.255.255.0 is on the same subnet as the Local Area Connection interface of the host PC (192.168.1.105).
- The IP address of the DCHP server (192.168.1.12) is the same DHCP server that allocated the Host PC’s address.
- The IP address of the DNS server (192.168.1.12) is the same DNS server that the Host PC uses.
- The IP address of the Default Gateway (192.168.1.1) is the same Default Gateway that the Host PC uses.
This is illustrated in the following diagram:
Host-only Network connection
The NAT and Host-only network connections are a little harder to understand than a Bridged connection, and these link to the VMnet8 and VMnet1 network adapters that you see on your host machine respectively. I’ll deal with the Host only link to VMnet1 first.
When VMware created the VMnet1 interface, it also created a process that acts as a DHCP server for VMnet1. So if you link your guest’s network interface to the host-only option, you will find that it will automatically be allocated an IP address by the host on the same subnet as VMnet1. Here is an example of an IP address configuration given to a XP PC when its Network Interface was set to Host-only mode:
Four things to note:
- The DHCP assigned IP address, 192.168.80.129 with Subnet Mask 255.255.255.0 is on the same subnet as the VMnet1 interface of the host PC (192.168.80.1).
- The IP address of the DCHP server 192.168.80.254 (where did that come from?) is also on the same subnet as the VMnet8 interface of the host PC
There is NO Default Gateway. - The DNS server is the IP address of your host’s VMnet1 interface, although in actual fact it won’t resolve names for you at all anyway.
The purpose of the host-only interface is to allow you to set up a virtual machine that can only be seen by your host machine (and any other guest virtual machines it is hosting). It is a network-in-a-box. Your box – ie your host PC. The DHCP server component has its own IP address (192.168.80.254 above), and the VMnet1 interface provides a virtual shared Ethernet segment between your host and the guest virtual machine(s).
No packets on this network will ever leave your host PC or be seen by anyone monitoring your host NIC. It is therefore inherently secure and gives you a great way to test applications in a secure environment. Note, however that if your host is hosting multiple guest virtual machines, and those VMs are using the host-only networking connection, then ALL packets from ALL machines attached to the VMnet1 interface can be seen by EVERY virtual machine.
The following diagram summarises this:
NAT Network connection
Similar to VMnet1, when VMware created the VMnet8 interface, it also created a process that acts as a DHCP server, a DNS server, and a NAT router for VMnet8. You can see that VMnet8 does a lot more than VMnet1. Here is an example of an IP address configuration given to a XP PC when its Network Interface was set to NAT mode:
Four things to note:
- The DHCP assigned IP address, 172.16.101.225with Subnet Mask 255.255.255.0 is on the same subnet as the VMnet8 interface of the host PC.
- The IP address of the DCHP server 172.16.101.254 is also on the same subnet as the VMnet8 interface of the host PC.
- You have a default gateway of 172.16.101.2 (again, where did that come from?).
- The DNS server is also 172.16.101.2.
The purpose of the NAT interface is to allow your VM access to external devices without using another IP address from the host’s subnet as required when using a Bridged networking connection. This is achieved by using a DHCP server function just like with the host-only connection to VMnet1, as well as giving the guest a DNS server and default gateway at yet another IP address which is equal to the VMnet8 interface IP address plus 1.
The following diagram illustrates this:
Key Point #2 – Your guest PC’s network adapter is tied to one of three possibilities:
Bridged directly to the host network adapter where it is accessible by any device that can access your Host PC.
Host only, where is can only communicate with your host’s VMnet1 interface.
NAT, where your host can communicate directly with your host’s VMnet8’s interface, but more importantly, your host PC provides a NAT router process that serves as a default gateway and DNS server, and forwards packets on your guest’s behalf after swapping your guest’s private IP address for the host’s Local Area Network Connection’s IP address.
Where did those DHCP Servers and DNS come from?
As promised earlier, I’ll delve a little deeper into the VMware host configuration. To do this, you’ll have to run the vmnetcfg.exe utility that comes with VMware Player – but it’s not easy to find. See this post to learn how to extract the vmnetcfg.exe file from your VMware Player installer file.
Running vmnetcfg.exe on your host machine shows the following interface:
Here you see that there are actually ten virtual interfaces, named VMnet0 through to VMnet9. Note that you don’t see any reference to VMnet0 (or any other bridged interfaces) on your host machine’s IP config. That’s because a bridged interface gives a direct physical connection to a particular interface. If you have more than one physical interface, such as an Ethernet adapter AND a Wireless adapter, you can create custom bridged interfaces for each adapter. If your host PC supports VLANs (like my Macintosh) then you can even bridge virtual interfaces to VLAN interfaces on the Host PC.
If you take a look at the VMnet1 (Host-only) configuration, you can see that enabling the DHCP component is an option that can be turned on and off.
Clicking on the DHCP Settings button brings up the DHCP Settings, such as this:
As it turns out, the IP address of the DHCP server (as shown in your Guest IP config) will always be the LAST IP address of the range shown – in this case 192.168.80.254.
For a host-only configuration, there is no default gateway address, and no DNS address (even though the DHCP server allocates the VMnetn IP address as a DNS). Your VMnetn adapter on the host PC will always be allocated the first IP address available in the Subnet IP range defined. (Be careful it does not clash with the DHCP range of addresses or you will get Duplicate Address problems)
Finally, I’ll take you to look at the NAT connection configuration on VMnet8:
We won’t explore the DHCP settings, they are the same as the Host-only configuration, but if you click on the NAT Settings button, you will see that you can specify a gateway IP that will be allocated by the DHCP server. By default, it is the 2nd IP address on the subnet. From here you can see that there is also a DNS Settings button where you can actually specify the IP addresses of DNS servers that you would like to be given as part of the DHCP IP address allocation.
Multiple Adapters
If you want to, you can create additional adapters. These may be Bridged, NAT or Host-only.
Bridged adapters can be linked to any physical interface on your host PC, including logical VLAN interfaces, (if your Host PC supports VLANs). So you can link one Virtual Interface to say your Ethernet adapter, and another to your wireless adapter. However, to do this you must first turn off Automatic Bridging on VMnet0.
Note: after turning OFF Automatic bridging on VMnet0, you can assign physical adapters to specific VMnet interfaces, then go back to VMnet0 and turn Automatic bridging back on.
Automatic bridging is special, and will bridge itself to which ever physical interface gives it the best shot at getting to the internet, and is only possible on VMnet0. Your VMnet0 interface is set up for Automatic Bridging by default.
Also, you can only have one NAT interface, and again VMware will use whichever physical interface your Host PC uses to connect to the internet as the outside interface for your NAT.
By default, all VMNet interfaces are Host-only, but inactive. To activate a Host-only interface, all you have to do is check the Connect a host virtual adapter to this network option. Once you have done that and applied the configuration, you will see an additional adapter on you host PC, such as:
There are more advanced options as well, and some of them are covered here. But from me, I’ll finish with the key points for this section:
Vmware Virtual Ethernet Adapter For Vmnet1 Driver Download
Vmware Virtual Ethernet Adapter For Vmnet1 Driver Details:
Vmware Virtual Ethernet Adapter For Vmnet1 File Name: vmware_virtual_ethernet_adapter_for_vmnet1.zip
Vmware Virtual Ethernet Adapter For Vmnet1 Driver Version: 5269g4z.9
Vmware Virtual Ethernet Adapter For Vmnet1 ZIP Size: 126.kb
Vmware Virtual Ethernet Adapter For Vmnet1 was fully scanned at: 7/29/2023 Scan Status: 
OK
Vmware Virtual Ethernet Adapter For Vmnet1 now has a special edition for these Windows versions: Windows 7, Windows 7 64 bit, Windows 7 32 bit, Windows 10, Windows 10 64 bit,, Windows 10 32 bit, Windows 8, Windows Vista Home Premium 32bit, Windows 10 Enterprise 32bit, Windows 10 S 64bit, Windows 10 Pro 32bit, Windows 10 32bit,
Vmware Virtual Ethernet Adapter For Vmnet1 Download Stats:
Direct Download Success Stats:
Reports Issued By 50/55 Users
Success Reported By 7/50 Users
Driver Download Score71/100
Driver Installation Score67/100
Overall preformance Score64/100
1Thumbs
Up
0Thumbs
Down
Installation Manager Success Stats:
Reports Issued By 1800/1851 Users
Success Reported By 1672/1800 Users
Driver Download Score93/100
Driver Installation Score96/100
Overall preformance Score77/100
1582Thumbs
Up
34Thumbs
Down
DOWNLOAD OPTIONS:
1. Direct Download
This option requires basic OS understanding.
Select Your Operating System, download zipped files, and then proceed to
manually install them.
Recommended if Vmware Virtual Ethernet Adapter For Vmnet1 is the only driver on your PC you wish to update.
2. Driver Installation Manager
This option requires no OS understanding.
Automatically scans your PC for the specific required version of Vmware Virtual Ethernet Adapter For Vmnet1 + all other outdated drivers, and installs them all at once.
Other drivers most commonly associated with Vmware Virtual Ethernet Adapter For Vmnet1 problems:
Vmware Virtual Ethernet Adapter For Vmnet1 may sometimes be at fault for other drivers ceasing to function
These are the driver scans of 2 of our recent wiki members*
Scan performed on 4/26/2019, Computer: NEC PC-VN370CS1KS — Windows 7 64 bit
Outdated or Corrupted drivers:11/23
| Device/Driver | Status | Status Description | Updated By Scanner |
| Motherboards | |||
| Intel(R) ICH9 Family PCI Express Root Port 4 — 2946 | Corrupted By Vmware Virtual Ethernet Adapter For Vmnet1 | ||
| Mice And Touchpads | |||
| eGalaxTouch USB Input Device | Up To Date and Functioning | ||
| Microsoft Microsoft USB IntelliMouse Explorer | Up To Date and Functioning | ||
| ELAN Samsung PS/2 Port Input Device | Up To Date and Functioning | ||
| Usb Devices | |||
| NEC NEC USB-diskette | Corrupted By Vmware Virtual Ethernet Adapter For Vmnet1 | ||
| MBB ZTE Mass Storage Device | Up To Date and Functioning | ||
| Sound Cards And Media Devices | |||
| ASUSTek ASUSTeK TV7134 BDA Video Capture | Corrupted By Vmware Virtual Ethernet Adapter For Vmnet1 | ||
| AVerMedia Controller video multimediale | Up To Date and Functioning | ||
| Dolby Laboratories Audio Device on High Definition Audio Bus | Corrupted By Vmware Virtual Ethernet Adapter For Vmnet1 | ||
| Network Cards | |||
| JMicron JMicron PCI Express Gigabit Ethernet Adapter | Corrupted By Vmware Virtual Ethernet Adapter For Vmnet1 | ||
| Keyboards | |||
| Microsoft HID Keyboard | Up To Date and Functioning | ||
| Hard Disk Controller | |||
| Intel Standard AHCI 1.0 Serial ATA Controller | Up To Date and Functioning | ||
| Others | |||
| Intel Intel(r) AIM External TV Encoder Driver 4 | Up To Date and Functioning | ||
| Intel USB-IF USB 3.0 Hub | Corrupted By Vmware Virtual Ethernet Adapter For Vmnet1 | ||
| Nokia Nokia USB Phone Parent | Corrupted By Vmware Virtual Ethernet Adapter For Vmnet1 | ||
| Intel Intel(r) AIM External TV Encoder Driver 3 | Corrupted By Vmware Virtual Ethernet Adapter For Vmnet1 | ||
| Intel Intel(r) AIM External Flat Panel Driver 1 | Up To Date and Functioning | ||
| Cameras, Webcams And Scanners | |||
| Sonix USB Video Device | Up To Date and Functioning | ||
| Video Cards | |||
| Intel(R) HD Graphics 4000 | Corrupted By Vmware Virtual Ethernet Adapter For Vmnet1 | ||
| Input Devices | |||
| KME USB Human Interface Device | Corrupted By Vmware Virtual Ethernet Adapter For Vmnet1 | ||
| Port Devices | |||
| MediaTek MediaTek PreLoader USB VCOM Port (COM51) | Corrupted By Vmware Virtual Ethernet Adapter For Vmnet1 | ||
| Monitors | |||
| Sony Digital Flat Panel (1024×768) | Up To Date and Functioning | ||
| Mobile Phones And Portable Devices | |||
| Acer NOKIA | Up To Date and Functioning | ||
Scan performed on 4/24/2019, Computer: Acer Aspire5740 — Windows 7 32 bit
Outdated or Corrupted drivers:11/21
| Device/Driver | Status | Status Description | Updated By Scanner |
| Motherboards | |||
| Synaptics Intel(R) 5 Series/3400 Series-Chipsatzfamilie — SMBus-Controller — 3B30 | Up To Date and Functioning | ||
| Mice And Touchpads | |||
| Genius Scroll Mouse(4D3B) | Corrupted By Vmware Virtual Ethernet Adapter For Vmnet1 | ||
| Usb Devices | |||
| HP USB Printing Support | Up To Date and Functioning | ||
| SafeNet SafeNet Sentinel Dual Hardware Key | Outdated | ||
| Realtek Realtek USB 2.0 Card Reader | Outdated | ||
| Sound Cards And Media Devices | |||
| Philips Philips SAA713X, Hybrid Capture Device | Up To Date and Functioning | ||
| AMD ATI High Definition Audio Device | Up To Date and Functioning | ||
| NVIDIA MPU-401 Compatible MIDI Device | Corrupted By Vmware Virtual Ethernet Adapter For Vmnet1 | ||
| Network Cards | |||
| Intel(R) Centrino(R) Wireless-N 1030 | Outdated | ||
| Keyboards | |||
| Microsoft Keyboard Device Filter | Up To Date and Functioning | ||
| Hard Disk Controller | |||
| Silicon Integrated Kontroler SiS PCI IDE | Up To Date and Functioning | ||
| Others | |||
| Point Grey Research Texas Instruments OHCI-konformer IEEE 1394-Hostcontroller | Up To Date and Functioning | ||
| Intel HID Sensor Collection | Outdated | ||
| Intel Intel(r) AIM External TV Encoder Driver 5 | Up To Date and Functioning | ||
| Mad Catz Programmable Support for Keyboard | Up To Date and Functioning | ||
| Cameras, Webcams And Scanners | |||
| Canon Canon MG5300 series | Up To Date and Functioning | ||
| Video Cards | |||
| ATI ATI Technologies, Inc. 3D RAGE PRO AGP 2X | Outdated | ||
| Input Devices | |||
| Lenovo USB Device | Corrupted By Vmware Virtual Ethernet Adapter For Vmnet1 | ||
| Port Devices | |||
| Sony Ericsson Sony Ericsson 750 USB WMC Device Management (COM7) | Corrupted By Vmware Virtual Ethernet Adapter For Vmnet1 | ||
| Monitors | |||
| Sony Digital Flat Panel (1024×768) | Corrupted By Vmware Virtual Ethernet Adapter For Vmnet1 | ||
| Mobile Phones And Portable Devices | |||
| Acer NOKIA | Corrupted By Vmware Virtual Ethernet Adapter For Vmnet1 | ||
| Driver Model | OS | Original Upload Date | Last Modification | Driver File | File Size | Compatible Computer Models | Availabilty To Instalation Manager |
| Vmware Virtual Ethernet Adapter For Vmnet1 73243 | For Windows 7 32 bit | 10/31/2014 | 12/27/2016 | all_drivers-73243.exe | 40kb | Sony VGN-CS36TJ_U, Toshiba SATELLITE C855-1WU, Lenovo 7360W78, HP PS426AA-ABG m1299a, IBM 8303MJ8, NEC PC-VJ22ERNCHTLB, Acer Veriton 7700GX, Gateway MX6422, Panasonic CF-SX1WEUHR, HP HP Compaq dc5100 MT, IBM 1831W1U, and more. | |
| Vmware Virtual Ethernet Adapter For Vmnet1 42369 | For Windows 7 64 bit | 1/12/2015 | 12/28/2016 | all_drivers-42369.exe | 27kb | Fujitsu FMVXD1W92Z, Toshiba Satellite C850-B906, HP FJ440AA-UUW s3542.sc, IBM 2668WGY, Toshiba SATELLITE PRO C50-A-1HZ, Sony VGN-CR260F, I.C.S Olivetti MK510, and more. | |
| Vmware Virtual Ethernet Adapter For Vmnet1 80722 | For Windows 7 | 12/6/2014 | 12/27/2016 | all_drivers-80722.exe | 119kb | Toshiba Dynabook R634/L, SAMSUN SX60P, NEC PC-LL700GD, Sony VGN-CS2, Toshiba SATELLITE PRO T130, Sony VGN-NS220TH, IBM ThinkPad R40, HP Db234a-abg 504a, Mecer X105, Fujitsu FMV8NU1LC5, Toshiba Qosmio X75-A, Notebook MIM 2270, and more. | |
| Vmware Virtual Ethernet Adapter For Vmnet1 B2477 | For Windows 10 | 12/30/2014 | 12/27/2016 | all_drivers-b2477.exe | 90kb | IBM 8183Y59, HP GP G62-A20SY NB, HP D7219A-ABA 555Y, Lenovo 20188, and more. | |
| Vmware Virtual Ethernet Adapter For Vmnet1 1.11.1243 | For Windows 10 64 bit | 1/23/2015 | 12/30/2016 | all_drivers-1.11.1243.exe | 212kb | Sony SVS13A17GBB, Sony VPCCW29FS, LG LS75-26JLCE1, Gigabyte X58A-OC, Sony VPCCA2Z0E, Packard Bell PACKARD BELL IMAX X7300 SP, Sony VPCEB33FG, NEC PC-MT6005A, Sony VPCF235FA, LG S1-M402E1, Fujitsu FMVNFD75RG, and more. | |
| Vmware Virtual Ethernet Adapter For Vmnet1 U42949 | For Windows 7 32 bit | 10/21/2014 | 12/29/2016 | all_drivers-u42949.exe | 168kb | Sony VGC-JS51B_P, SOTEC WG Series, SAMSUN 350V, Sony VGC-RB41P, Lenovo 20AMS05C00, Fujitsu FMVLX55M, Lenovo ThinkPad L530, HP Pavilion ZV6000, HP RK570AAR-ABA m7760, and more. | |
| Vmware Virtual Ethernet Adapter For Vmnet1 L202.184 | For Windows 7 64 bit | 12/14/2014 | 12/30/2016 | all_drivers-l202.184.exe | 97kb | HP 310-1125uk, Compaq PG058AA-ABG SR1178A AN430, MEGAWARE Mage All-In-One, HP 27-1015ef, Fujitsu FMVNFE50W, Dimotion PCDBS44H, Fujitsu FMVNFD85D, Packard Bell IMEDIA X1300 AIO, HP HP Compaq nc6120, Toshiba Satellite C850-B820, Sony SVE15116FJB, EDsys EHI33220M, and more. | |
| Vmware Virtual Ethernet Adapter For Vmnet1 71.1372 | For Windows 7 | 9/3/2014 | 12/27/2016 | all_drivers-71.1372.exe | 81kb | MCJ AMIS, Sony VGC-JS52JB_S, NEC PC-MY18XEZ77, Compaq PE427A-ABU S7150UK GB420, Sony PCG-U101, Zoostorm 7010-0246A, HP HP Compaq nc6000, Toshiba Dynabook EX/56LWH, Fujitsu FMVNFD40, Fujitsu CELSIUS R920 POWER, and more. | |
| Vmware Virtual Ethernet Adapter For Vmnet1 Z83772.1 | For Windows 10 | 11/30/2014 | 12/27/2016 | all_drivers-z83772.1.exe | 190kb | OEGStone DB75EN, NEC EASYNOTE P910401306, Fujitsu FMVXNBLQ2Z, VIA KM400/A-823x, Sony VPCSE23FX, Compaq PJ688AV-ABA SR1005T NA440, Toshiba Satellite 2455, HP GU519AA-UUW a6233.sc, HP Pavilion zv5000, NEC PC-MY24ABZE4, Lenovo 20B70034SG, and more. | |
| Vmware Virtual Ethernet Adapter For Vmnet1 1.131.163 | For Windows 10 64 bit | 9/14/2014 | 12/30/2016 | all_drivers-1.131.163.exe | 75kb | NEC PC-MJ25XRZEE, LG R560-UAPW3E, ECS M916, Advent DT1404, HP HP Pavilion dv2700, APC4R APC4R116, Sony VGN-AW15G_H, Fujitsu LifeBook T5010, Viglen GENIE D850EMV2, HP Presario V3000, and more. | |
| Vmware Virtual Ethernet Adapter For Vmnet1 2.13207 | For Windows 8 | 11/13/2014 | 12/27/2016 | sydrzdwcg-2.13207.exe | 201kb | Sony SVS13A15GDB, Acer AOA150p/BGW, IBM 8183GNG, HP FR564AA-ABF m9356.f, and more. | |
| Vmware Virtual Ethernet Adapter For Vmnet1 I6021.18 | For Windows 7 32 bit | 1/16/2015 | 12/29/2016 | all_drivers-i6021.18.exe | 99kb | Sony VPCEH1Z1R, IBYTE UDP GN ANDROS-I60L, Panasonic CF-19KHRAXAM, Fujitsu PRIMERGY RX350 S7, WIPRO WIV52B55-0007, NEC VERSAL2101 RNB31065295, Toshiba SATELLITE C50D-A-10Z, NEC PC-MY26AEZR4, HP HP Compaq nc4010, HP HP Pavilion dv9000 NoteBook PC, JDL NOTE UL, Matsonic MS8158, and more. | |
| Vmware Virtual Ethernet Adapter For Vmnet1 40482 | For Windows 7 64 bit | 1/27/2015 | 12/30/2016 | gfee-40482.exe | 101kb | HP GN634AV-ABA a6210, Panasonic CF-53AAC01FD, Toshiba SATALLITE A300, Sony VPCEG1S1R, HP KN458AA-ABT a6450.is, HP H9-1156eg, Fujitsu PRIMERGY RX200 S7, HP P6-2006es, Fujitsu FMVWJS2B77, Sony VPCEH3T9E, LG R490-KR8WK, Gateway P-6312 HSN, and more. |
If you encounter problems with the direct download for these operating systems, please consult the driver download manager for the specific Vmware Virtual Ethernet Adapter For Vmnet1 model.